Menu Operation
* When TV signals is Satellite.
Auto
T
uning
Satellite Setup
■
Transponder:
Press the
INDEX
button
to switch between the satellite list and the
corresponding transponder list.
■
▲
/
▼
:
Press the
▲
/
▼
button to select the
satellite/transponde from the list.
■
CH+/CH-:
Press the
CH+/CH-
button to
page up or down the satellite/transponder
list.
■
Delete:
Press the red button to delete the
current satellite/transponder.
■
Edit:
Press the green button to edit the
current satellite/transponde.
■
Add:
Press the yellow button to add a
new satellite/transponde.
Press the
►
button to configure the satellite.
■
LNB TYPE:
Select the LNB type.
■
LNB Power:
Select the power supply
type for the LNB.
■
22KHz:
22KHz SWITCH. Select the 22KHz
depending on the LNB type.
■
Motor:
Sets the positioned type between DiSEqC1.2 and USALS.
■
DiSEqC1.0:
You can choose one of four satellites. Used to
choose proper device.
■
Toneburst:
You can choose one of two satellites.
Used to choose proper device.
■
DiSEqC1.
1
:
You can choose one of
sixteen
satellites. Used to
choose proper device.
When Motor is set to DiSEqC1.2 or USALS:
■
Mark All
:
■
Unmark All
:
Press the
i
button to mark all the
satellites/transponders.
Press the
button to unmark
all the satellites/transponders.
•
Goto Reference: Drive antenna to zero position.
GotoX: Moves the antenna to the location specified by Set Location.
Store Position: Stores current position as the selected positioner limit.
- Set Position:
Press the
ENTER
button to set Position.
Move Auto: Rotates the antenna automatically.
Move Continue: Rotates the antenna until the rotation has been completed or
stopped manually.
Move Step: Rotates the antenna in accordance with the step value. Enables the
antenna make a finer adjustment.
Goto Position: Rotates the antenna to the stored satellite position.
14
Press the
button
to select the appropriate country,
▲
/
▼
then press
ENTER
the button.
Press the
button
to select the appropriate satellite,
▲
/
▼
then press
ENTER
the button.
