Changhong Electric FSR129R02W, User Manual

Page: 6 / 14

5
Cleaning before use
Wipe the inside of the Fridge with a weak solution of bicarbonate of soda. Then
rinse with warm water using a damp sponge or cloth. Wash the baskets and
shelves in warm soapy water and dry completely before replacing in the Fridge.
The external parts of the Fridge can be cleaned with wax polish.
Before plugging in YOU MUST
Check that you have a socket which is compatible with the plug supplied with the
Fridge.
Before switching on!
DO NOT SWITCH ON UNTIL FOUR HOURS AFTER MOVING THE FRIDGE.
The coolant fluid needs time to settle. If the appliance is switched off at any time,
wait 30 minutes before switching back on to allow the coolant fluid to settle.
Before filling your Fridge
Before storing foods in your Fridge, turn the Fridge on and wait for 24 hours, to
make sure it is working properly and to allow the Fridge to fail to the correct
temperature.
START
Testing
1.Clean the parts of the refrigerator with lukewarm water containing a little
neutral detergent and with clear water, and wipe them dry.
Notes: Electric parts of the refrigerator can only be wiped by dry cloth.
2.Turn the thermostat knob to the "3" position, turn on electricity. The
compressor and the light inside the refrigerator begin to work..
3.Open the door 30 minutes later, if the temperature in the refrigerator
decreased obviously, it shows that the refrigerator system works well. When the
refrigerator operates for a period of time, the temperature controller will