Changan M201 2014, Wiring Diagram, Page: 7 / 258

M201 2014.01
1.1.1-3 1.1.1-3 Introduction
9. Power supply type supplied to fuse. +B
represents battery power supply. ACC
represents power supply when ignition switch
is at “ACC”. IG1 represents terminal 2 output
when ignition switch is at “ON”. IG2
represents terminal 5 output when ignition
switch is at “ON”.
Note
：
The difference between IG1 and
IG2 is that there is power supply output
from IG1, but no from IG2 when the
ignition switch is at “ST”.
10. Wiring harness splice point
11. Fuse number consists of a fuse code and a
sequential number. Code EF represents
fuses in the main fuse and relay box; Code IF
represents fuses in instrument panel fuse and
relay box. For details, please refer to fuse
table.
12. A relay is represented by two capital English
letters. Code ER represents relays in the
main fuse and relay box; Code IR represents
relays in the instrument panel fuse and relay
box. For details, please refer to the relay
table.
13. Filling grey shade means the electronic
component, P01 represents the wiring
harness connector code.
14. Circuit differences in different models,
engines or specifications are noted by
dashed lines and texts beside the circuit.
15. The 8-shaped symbol between wiring
harnesses represents ‘Unshielded Twisted
Pair’ (UTP), which is used for sensor signal or
data communication.
16.
If a system wiring diagram requires more than one
page, it starts with
and ends with . If more than
one circuit extends to the next page, use B, C and other
letters to represent respectively.
Not Spliced Cross Circuit
Spliced Cross Circuit
M1101003
0.5 BK/WH
0.85 BK/WH
ECM(1.0L)
ECM(1.3L)
17
S01
13
S01a
M1101004
0.5 BU
0.5 VT
M1101005
A1
A1
0.5 RD/YE
A1
0.5 RD/YE
A1
M1101006