SnakeSys User Manual
43 / 45
7.7.2
All Products
Fixed a timing issue with DMX receive where the output packet update did not take place until the next packet’s break was
received. This could cause latency problems on systems with slow DMX refresh.
7.8
Version 209
7.8.1
All Products
Applied the Art-Net output hold fix to DMX to always hold the DMX output after valid Art-Net has been received and output as
DMX.
7.9
Version 208
7.9.1
SnakeSys T2
Support for SnakeSys T2 added.
7.10
Version 206
7.10.1
SnakeSys B4
Added support for storing of ChamNet settings.
7.11
Version 204
7.11.1
Snakesys R4
Fixed a bug where when the units settings were reset from the front-panel the POE ports were disabled. Since there is still no
way to re-enable the ports in MagicQ this could be a serious issue for some end users.
Fixed a bug where the PoE ports were not turned off when the unit was placed in standby mode.
Changed operation of RDM filter button to match that of ART/ACN and IN / OUT with respect to ChamNet mode
7.11.2
Snakesys B4
Enabled break detect on DMX input
7.12
Version 203
7.12.1
Snakesys B4
Modified DMX input so that it can be enabled when outputs 1-4 are active
