Champtek IG300BT, User Manual

Page: 66 / 79

61
7.36 Miscellaneous Parameters
7.38.1 Symbology Identifier
Symbology Identifier Transmitted
<Symbology Identifier
Not Transmitted>
With this function ON, a leading character will be
added to the output string while scanning codes, user
may refer to the following table to know what kind of
barcode is scanned.
Please refer to the table below for matching code
Symbology Identifier of codes read in.
ID Code Type ID
Aztec * Interleaved 2 of 5 I
Codabar D GS1 DataBar Omini *
Code 11 * GS1 DataBar Expanded *
Code 39 * GS1 DataBar Limited *
Code 93 D MSI code *
Code 128 D Plessey Code D
DataMatrix * PDF417 *
EAN-8 FF MicroPDF417 *
EAN-13 F UPC-A A
EAN-128 D UPC-E E
7.37 Preambles and Postambles
7.39.1 Preamble
The scanner can be programmed to output Barcode
data according to the following format: [PREAMBLE
STRING] [BAR CODE DATA]
Example:
To send a <STX> in front of the barcode, scan only
programming code <STX>.
As a result, the scanner will give the following barcode
output: [<STX>] [BAR CODE DATA]