Champlain ACM-849 Quick Start Manual Download Page 4

G. TROUBLE SHOOTING

Problem 

Cause / Solution

The pool does not warm up. 

• Make sure that water is flowing through the hoses.

 

• Has it been sunny enough?

 

• Insure the maximum amount of sunshine and increase 

 

  the running time of the filter pump.

 

• Cover your pool overnight to avoid loss of heat.

 

• It is possible that you may need several solar heaters.

No bubbles appear after the 

• Check the filter system and ensure that water from 

equipment has been attached to 

  the pool is flowing through the filter pump, then

the pump. 

  through the solar heater and through the connector 

 

  hose back to the pool.

Air bubbles come out of the pool 

• Check the connector hoses for any damage.

return after the pump has been 

• Check that the hose clamps have been properly 

turned on. 

  tightened.

Water draining out of the system. 

• Check the seals in the system of hoses.

 

• Check the hose clamps to insure they are tight enough.

 

• Check the connector hoses for any cracks.

G. 

%²1"//"(&

Problème 

Cause/Solution

-hFBVOFTFSÏDIBVGGFQBT

t7ÏSJGJFSRVFMhFBVThÏDPVMFEBOTMFTCPZBVY

t4VGGJTBNNFOUEFTPMFJM 

t"TTVSF[WPVTEhVOFFYQPTJUJPONBYJNBMFBVTPMFJM

 

  et augmenter le temps de fonctionnement de la pompe

t$PVWSJSMBQJTDJOFMBOVJUBGJOEhÏWJUFSMBQFSUFEFDIBMFVS

t*MFTUQPTTJCMFRVFWPVTEFWJF[SBKPVUFSEhBVUSFTDIBVGGFFBV

 

  solaires.

*MOhZBQBTEFCVMMFTRVJBQQBSBJTTFOU

t7ÏSJGJF[MFTZTUÒNFEFGJMUSBUJPO"TTVSF[WPVTRVFMhFBVEFMB

après que le chauffe-eau est été mis 

  piscine circule à travers la pompe, ensuite le chauffe-eau

en marche la première fois. 

  solaire et le retour d'eau à la piscine.

%FTCVMMFTEhBJSTPSUFOUQBSMFSFUPVS

t7ÏSJGJFSTJMFTCPZBVYTPOUFOEPNNBHÏT

EhFBVBQSÒTRVFMBQPNQFTPJU

t7ÏSJGJFSRVFMFTDPMMFUTTPJFOUCJFOTFSSÏT

mise en marche 
 

-hFBVThÏDPVMFEVTZTUÒNF

t7ÏSJGJFSMFTEJTQPTJUJGTEhÏUBODIÏJUÏEFTCPZBVY

t7ÏSJGJFSTJMFTDPMMFUTTPOUBEÏRVBUFNFOUTFSSÏT

t7ÏSJGJFSTJMFTCPZBVYTPOUDSBRVÏT

Reviews: