Pot, Pan and
Utensil Washer
MODEL UTC-6
MODEL UT
C-6 WASHER
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC 27115 • 800/532-8591 • Fax: 336/661-1979 • www.championindustries.com
Dimensions shown in inches
SPECIFICATIONS
Machine Construction
12, 14, 16 & 18 gauge Stainless steel.
Door
Stainless Steel drop-down door for easy
loading and unloading.
Spray Arm Assembly
STAINLESS STEEL spray arm assembly
with stainless steel jets, removable end
caps and hand operated quick release
mechanism for easy cleaning and
reassembly.
Filter
Perforated, removable, Stainless Steel
baskets.
Water Pump
2 Hp, 208/240 or 480 volt, 1 phase or
3 phase 60 cycle with output of 100
gallons per minute at 35 to 45 P.S.I.
Digital Control & Information Center
110 volt control circuit with push pad
operation of “power on”, “stop” and “short,
medium or long wash cycles”. A digital
display indicates “time remaining” for
each cycle. LED’s indicate wash, rinse
and unload functions. A buzzer is also
included to provide an audible indication
of time to unload. A programmable
controller allows the push pad to be used
as a “diagnostic center” by displaying
“error codes” for ease of troubleshooting.
Gauges
Special moisture resistant design
measure wash temperature, rinse
temperature, wash pressure.
Wash Tank
Stainless Steel with electric heater,
thermostatically controlled, low water
protected, sloped to drain with a
14-gallon capacity
Rinse Tank
Stainless Steel with 3 kW 208/240 or
480 volt electric booster heater to provide
180°F/190°F hot sanitizing rinse.
Racks
Stainless Steel built to match specific
washing requirements.
