Volume crated:
130 cu. ft.
Shipping weight crated:
800 lbs.
Dimensions shown in inches
Warning:
Plumbing and electrical connections should be made by qualified personnel who will
observe all the applicable plumbing, sanitary, safety codes and the National Electrical Code.
Note:
Water Hammer Arrestor (meeting ASSE-1010 standard or equivalent) to be supplied
(by others) in common water supply line at service connection.
Plumbing Notes:
Because of the variation in house-supplied steam and water pressures, steam
and water pressure regulating valves (PRVs) may be needed. The PRVs can be purchased from
Champion or obtained locally.
Venting Notes:
Fabricated duct size: 3-7/8" x 15-7/8" (Outside dimensions)
Caution:
Silver, aluminum and pewter are attacked by sodium hypochlorite (liquid bleach).
Champion low-temperature dishwashing machines are designed for liquid bleach solutions not
exceeding 50 ppm.
Machine only
Minimum
Maximum
Supply Ckt. Overcurrent
Elec.
Rated
Conductor
Protective
Specs.
Amps
Ampacity
Device
208/60/1
77
100
100
240/60/1 68
90
90
208/60/3 43
60
60
240/60/3 37
45
45
480/60/3 18
25
25
575/60/3 14
20
20
Steam or Hot Water Heat
Minimum
Maximum
Supply Ckt. Overcurrent
Elec.
Rated
Conductor
Protective
Specs.
Amps
Ampacity
Device
208/60/1
25
35
35
240/60/1
22
30
30
208/60/3
13
20
20
240/60/3
11
15
15
480/60/3
6
15
15
575/60/3
5
15
15
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC 27115 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 905/562-4195 • Fax: 905/562-4618
Utilities
1
Electrical
Machine connection (see Table)
2
Hot Water
3/4" NPT 140°F/60°C min. hot water
connection. Flow pressure 20-22 psi.
3
Drain
1-1/2" NPT machine connection.
Maximum flow 15 gpm.
4
Steam
A
3/4" NPT machine connection.
Flow pressure 15-30 PSI. (Steam coil)
B
3/4" NPT machine connection.
Flow pressure 15-30 PSI.
(Steam injector)
5
Condensate
1/2" NPT machine return to boiler
6
Vents
(when required)
A
Load end: 200 CFM @ 1/4" S.P.
B
Unload end: 400 CFM @ 1/4" S.P.
(With blower-dryer increase room
ventilation by 600 CFM.)
44" Single Tank with 22" Prewash
Low-Temperature
Rack Conveyor Dishwashing Machine
MODEL 66 LTPW
SPECIFICATIONS
Capacity
Racks per hr. (NSF rated)
180
Wash tank (gal.)
20
Conveyor speed (ft./min.)
5
Motor Horsepower
Drive
1/6
Wash
2
Prewash
1
Water Consumption
Gal. per hr. (max. use)
278
Gal. per rack
1.54
Temperatures °F
Wash
120
Final Rinse
140
Heating
Tank heat, electric (kW)
15
Tank heat, steam (lbs./hr
required at 15 psi flow
pressure)
75
Standard 20" x 20"
rack complement
Peg
2
Flat
1
