Champion Industries, Inc.
P. O. Box 4149, Winston-Salem, NC 27115
Tel: 336/661-1556 Fax: 336/661-1979
www.championindustries.com
2674 N. Service Road,
Jordan Station, Ontario, Canada L0R 1S0
Tel: 800/263-5798 Fax: 905/562-4618
Washer
Automatic washing machine designed to wash all pots, pans and utensils commonly used in
baking and cooking operations. Machine is pass-thru type with tabling on each end.
Cabinet
39" wide x 38-1/4" deep x 76-1/2" high. Overall height with door open: 99". Door opening:
28" wide x 28-1/2" high. Constructed of 12, 14 & 16 gauge, type 304 #3 finish, stainless steel.
All seams tig-welded, cleaned and polished.
Door
Lift-up door type. Two doors, single control handle. Counter balanced with self-lubricating guides,
stainless steel cables on nylon rollers with cable guards to ensure tracking. Doors are interlocked
with limit switch to prevent machine operation while doors are open. Door construction:
16 gauge, type 304 #3 finish, stainless steel.
Recirculating Wash Tank
Heated by 12 kW total 208/240 at 480 volt electric immersion heater, thermostatically controlled
wash temperature and low water protection system. 20 gallons, 14 gauge stainless steel, sloped
to drain. Infrared gas and steam coil heating options available.
Wash Tank Filter
Perforated, stainless steel basket type, double filter system for increased effectiveness and easy
cleaning without emptying wash tank.
Wash Tank Fill Valve
Size 1/2" brass material, solenoid type, automatic.
Wash Tank Drain Valve
Size 1-1/4" brass material, gate type for manual or electrically operated ball valve for automatic
option.
Wash Pump
7-1/2 Hp, 208/240 or 480 volt, 3 phase, 60 cycle. Close coupled; 120 gallons per minute at 35 to
45 psi, mounted on 12 gauge stainless steel formed channel base.
Rotating Wash Hub and
Spray Arm Assembly
Water driven, stainless steel spray arm assembly with stainless steel jets, removable end caps and
hand-operated, quick-release mechanism for easy cleaning and reassembly. Mounted on stainless
steel base.
Sanitizing Rinse Tank
Stainless steel, 6 gallon capacity, with one 6 kW 208/240 or 480 volt electric booster heater to
provide 180°/190° F hot sanitizing rinse. Uses 2.8 gallons per 22 second cycle. Infrared gas and
steam coil heating options available.
Water Supply Valve
Size 1/2" brass material, solenoid type, automatic.
Final Rinse Piping
Type 304 stainless steel tubing with brass compression fittings and brass or optional stainless steel
full cone rinse jets.
Control & Information Center
110 volt control circuit with push pad operation of “Power On,” “Stop” and “Short, Medium or
Long Wash Cycles.” A digital display indicates “Time Remaining” for each cycle. LED’s indicate
wash, rinse and unload functions. A buzzer is also included to provide an audible indication of
time to unload. A pre-programmed circuit board allows the push pad to be used as a “Diagnostic
Center” by displaying “Error Codes” for ease of troubleshooting. Moisture resistant gauges
measure Wash Temperature, Wash Pressure and Rinse Temperature.
External Rinse Spray Hose
Externally mounted rinse hose with spray gun for easy cleaning and maintenance of machine.
Steam Exhaust Vent
Steam exhaust vent 6-3/4" diameter, consisting of 16 gauge rolled collar for PVC pipe connection
bolted to the top of the machine. Machine pre-wired with control timer for the addition of a fan.
Optional Exhaust Fan
Draft inducer fan side mounted on exhaust duct to extract excess steam after final rinse cycle.
300 CFM @ .05" static pressure.1/10 Hp, 110 volt motor, 1550 RPM.
(1M) 4/08 Printed in U.S.A.
speCiFiCations
LD-12-pt pot, pan &
utensiL washer
