Upright 29” Conveyor
Dual Rinse
Dishwashing Machine
EUCCW SERIES
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC 27115 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 905/562-4195 • Fax: 905/562-4618
Booster connections may vary. Contact the Factory.
Standard Voltages
(Specify choice): 208/60/3, 240/60/3, and
480/60/3. Available in 3-phase only. For non-standard 3-phase voltages,
contact the Factory.
Plumbing Notes
Because of the variation in house-supplied water
pressure, a water pressure regulating valve (PRV) is needed (water
PRV is standard). Steam PRV’s may be required for pressure higher
than 30 psi. The PRVs can either be purchased from Champion or
obtained locally.
Warning
Plumbing and electrical connections should be made by
qualified personnel who will observe all the applicable plumbing,
sanitary, safety codes and the National Electrical Code.
Note
Water Hammer Arrestor (meeting ASSE-1010 standard or
equivalent) to be supplied (by others) in common water supply line
at service connection.
Venting Notes
Fabricated duct size: 3-7/8” x 23-7/8” (outside dimensions)
Utilities EUCCW4
1
Electrical
Contact factory for specific machine electrical requirements
NOTE:
Electric booster connection – contact Factory
2 Hot Water
3/4” NPT 180°F hot water connection.
(For machine without built-in booster)
3 Drain
2” NPT connection
4 Vents
A
Load end: 300 CFM 1/4” S.P.
B
Unload end: 800 CFM 1/4” S.P. With blower-dryer,
increase room ventilation by 600 CFM.
Utilities EUCCW6
1 Electrical
Contact factory for specific machine electrical requirements
NOTE:
Electric booster connection – contact Factory
2 Hot Water
3/4” NPT 180°F hot water connection.
(For machine without built-in booster)
3 Drain
2” NPT connection
4 Vents
A
Load end: 300 CFM 1/4” S.P.
B
Unload end: 800 CFM 1/4” S.P. With blower-dryer,
increase room ventilation by 600 CFM.
Utilities EUCCW8
1 Electrical
Contact factory for specific machine electrical requirements
NOTE:
Electric booster connection – contact Factory
2 Hot Water
3/4” NPT 180°F hot water connection.
(For machine without built-in booster)
3 Drain
2” NPT connection
4 Vents
A
Load end: 300 CFM 1/4” S.P.
B
Unload end: 800 CFM 1/4” S.P. With blower-dryer,
increase room ventilation by 600 CFM.
SPECIFICATIONS
Capacities
EUCCW4 EUCCW6 EUCCW8
Dishes per hr. (NSF rated) 12,970
16135
19140
Conveyor speed (ft./min.) 8.2
10.2
12.1
Motor horsepower
Drive
1/2 Hp
1/2 Hp
1/2 Hp
Prewash 30” [762]
1 Hp
1 Hp
1 Hp
Prewash 48” [1219]
3 Hp
3 Hp
3 Hp
Wash
3 Hp
3 Hp
3 Hp
Power Rinse*
N/A
3 Hp
3 Hp
Auxiliary Rinse
1/5 Hp
1/5 Hp
1/5 Hp
Water consumption
Gal. per hr. (max. use)
117
129
158
Temperatures °F
Wash (min.)
160
150
150
Power Rinse (min.)*
N/A
160
160
Auxiliary Rinse (min.)
165
165
165
Final rinse (min.)
180
180
180
Heating
Tank heat
Steam
Electric
Wash tank
125 lbs./hr.
25 kW
Rinse tank *
100 lbs./hr.
20 kW
Auxiliary rinse
50 lbs./hr.
10 kW
Electric booster
15
15
18
(kW required for 40°F rise)
Electric booster
25
25
32
(kW required for 70°F rise)
Steam booster
75
75
90
(lbs./hr. required for 40°F rise)
Steam booster
125
125
150
(lbs./hr. required for 70°F rise)
Venting
Minimum cfm, load end
300
Minimum cfm, unload end
800
*
EUCCW4 has no power rinse tank
Shipping weight crated:
150 lbs./ft.[68kg./m.]
Height with doors up:
95”
Height to remove doors:
100”
