Rinse Sentry
• This machine is equipped with a Rinse Sentry Feature that monitors the booster temp-
erature during the wash cycle and will extend the wash cycle time until a minimum of 180°F
is achieved in the tank. Once achieved, the machine will complete the wash cycle and
perform a final rinse.
Operation
Alarm/Notifications
Condition:
Dishwasher is off; all heaters are disabled.
Cause:
The machine was idle for user programmed time.
“SLEEP ” MODE
TOUCH THE SCREEN TO WAKE THE MACHINE.
SLEEP
Touch to Change
Condition:
The dishwasher operation is locked out.
Cause:
A temperature sensing thermistor has a problem.
Solution
:
WASH TEMP
THERMISTOR
CALL FOR
SERVICE
“CHECK THERMISTOR” ALARM and LOCKOUT
Contact the service agent for repair.
Condition:
The dishwasher has stopped filling.
Cause:
The machine has filled for 6 minutes but has not filled.
Solution
:
• Check the wash tank upper float for something jamming it.
CHECK DRAIN
WASH TEMP
Touch to Change
“CHECK DRAIN” ALARM
TO RESET THIS ALARM:
Push the ‘CHECK DRAIN’ button once the problem is fixed.
Call service if the machine continues to alarm.
TO RESET THIS ALARM:
Push the ‘CHECK FLOATS’ button once the problem is fixed.
Call service if the machine continues to alarm.
Condition:
The dishwasher has stopped operation.
Cause:
The upper float is up but the lower float is not made.
Solution
:
• Check the wash tank lower float to see if it is jammed.
CHECK FLOATS
WASH TEMP
“CHECK FLOATS ” ALARM
8
