![background image](http://html.mh-extra.com/html/champion/chnb500/chnb500_user-manual_2588407008.webp)
Champion ®
Makadamgatan 14 I 254 64 Helsingborg I Sweden
Designed in Sweden I Assembled in China
Correct Disposal of this product
This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources.
EN
7
TROUBLE SHOOTING
PROBLEMS
POSSIBLE REASONS & SOLUTIONS
Motor doesn’t start or attachment doesn’t rotate. For the jars, make sure that the tabs are seated
in the slots and turned clockwise.
Food is unevenly chopped.
Either you are chopping too much food at once,
or you are not pulsing properly. Reduce the
amount of food in the jar.
Food is too fi nely chopped or too watery
The food has been over processed. Use short
operating for best results.
You can not achieve snow from ice cubes.
For best result use ice straight from the freezer.
Try using short operating instead of long one.
Make sure the jar is completely dry before
adding ice.
Jar is leaking.
Make sure that your lid or blade assembly is pro-
perly assembled to the jar. Leaking may occur if
it is misaligned when twisted onto the jar. Turn
the lid tightly clockwise.
Unit doesn’t turn on.
Make sure the unit is plugged in.
Make sure the blade assembly is properly
assembled to the jar and that is not misaligned.
Unit doesn’t turn off.
Unplug the power cord from the electrical outlet
and call customer service for support.
Doesn’t mix well.
Pulse ingredients for best results. Press down
on the jar in short intervals for even blending and
chopping. For frozen ingredients, pulse in short
intervals of 2-5 seconds and repeat.
Lid/blade assembly will not properly align to the
jar.
Set the jar on a level surface. Place the lid or
blade assembly on top of the jar and align the
threads so that the lid/blades sit fl at on the jar.
Twist clockwise so that the lid/blades evenly
align to the jar until you have a tight seal.