![background image](http://html1.mh-extra.com/html/champion/chmd210/chmd210_user-manual_2588771006.webp)
5
EN
2.
Press the “SEAT” button again and it will move to medium and the “M” indicator light will
illuminate. This setting is stronger than low setting.
3.
Press the “SEAT” button again and it will move to high and the “H” indicator light will
illuminate. This setting is stronger than medium setting.
4.
Press the “SEAT” button again and the vibration will turn off.
5.
After approximately 15 minutes, the unit will automatically turn off.
Demo
1.
Press the “DEMO” button and the indicator light will illuminate.
2.
The “FULL” indicator light will blink, and the massager will go through a pre-set routine with
the back-massager fingers, heat, and vibration massager.
3.
It will automatically stop when the routine finishes in approximately 35 seconds.
Completion and Storage
1.
After you have finished using the appliance, unplug the power adaptor and disconnect from the
appliance.
2. Store the appliance safely in its box and in a dry place.
3. Do Not wind the power adaptor cord around the appliance body as this will damage the cord
over time. Simply loop the cable and place next to the appliance.
Cleaning the Appliance
CAUTION
: DO NOT IMMERSE IN WATER OR LIQUID.
1. Turn off and unplug appliance prior to cleaning.
2. Do Not immerse the appliance in water, or any other liquid.
3. Clean only with a soft, very slight damp sponge.
4. NEVER allow water or any other liquids to come into contact with the appliance especially the
controller, power socket or power adaptor.
5. Never use abrasive cleaners, solvents, steel wool, scouring pads, brushes, or strong chemicals
that might or might not be flammable and/or damaging to the product to clean.
Troubleshooting
Problem
Cause
Possible solution
No power.
1. Power not switched on.
2. Power adaptor not plugged
into the appliance
1. Plug in power adaptor and Switch
On at power point. If still no
power, check the power point has
power supplied by checking with
another appliance. If no power to
the power point, call an electrician.
2. Insert small plug end on the power
adaptor into the appliance.
No Massage functions.
1. Appliance not switched on.
1. Press the On/Off button. Press
one of the massage function but-
tons. Full, Upper, Lower or Seat.