Before first use
Before using your appliance for the first time, it is important that you read and follow the instructions in this use and care
booklet, even if you feel you are familiar with this type of appliance.
CAUTION: Blades are sharp! Use extreme caution when handling the blade assemblies. Always hold them by the base
of the blade assembly.
1.
Remove all packaging material and labels from the appliance.
2.
Wash the lids, jars and attachments in warm, soapy water with a soft cloth. Use caution when washing the blade
assemblies as the blades are very sharp.
3.
Rinse and dry thoroughly
4.
Jars, lids and attachments are all dishwasher safe. It is recommended that the lids and attachments be placed on the top
rack. Ensure that the attachments are removed from the jars before placing in the dishwasher.
5.
Wipe the motor base clean with a damp cloth.
Use
ASSEMBLY:
REMOVAL:
Fig.1 Fig.2
Fig.3
Fig.4
Fig.5
1.
Place the motor base on a clean, dry, level surface such as a counter or table top.
2.
Make sure the unit is unplugged.
3.
Add ingredients to the jar.
4.
Place the blade onto the jar and twist it on tightly until you have a good seal.(Fig. 1)
5.
Turn the jar upside down and place it onto the motor base, aligning the tabs on the jar with the motor base, aligning the
tabs on the jar with the motor base. Turn it clockwise, the unit is ready for use.(Fig. 3)
6.
When you have reached your desired consistency, stop the appliance by turning the jar counterclockwise (Fig. 4) and pull
straight up to remove.(Fig. 5)
NOTE: Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line.
7.
Turn the jar upright and remove the Blade Assembly by twisting the blade assembly counterclockwise. Be sure to store the
Blade Assembly attached to an empty jar when not in use.
8.
Place the Sip & Seal lid onto the jar, twist to seal and enjoy!
9.
Make sure that the motor base is unplugged when not in use.
Safety features
Built-in safety lock
The blender has a built-in safety lock feature, this ensures that you can only switch on the appliance while the cup and the blade sub-
assembly are assembled on the motor base securely. If the appliance is correctly assembled, the built-in safety lock will be unlocked.
IMPORTANT:
In the base of each blade’s collar, there is a silicone gasket seal that creates an airtight fit with the jars. After
dishwashing and before each use, always check to make sure the gasket is properly in place, as the heat from some dishwashers
may cause the gasket to become loose
.
WARNING
: Do not operate the motor continuously for more than 180 seconds at a time. Allow the motor to rest for 60 seconds
before continuing.
NOTICE
: If the blade is not running smoothly, stop the product and add some liquid, or reduce ingredients in the cup.
NOTE
: To prevent product overheating, dry ingredients must not be processed for more than 30 seconds at a time.
2
EN
