Champion ADM100, User Manual

Page: 8 / 25

1
2
4
5
6
7
8
9
11
12
10
3
13
1. LCD Display 8. Stop/Power Off Button
2. DC Power Jack 9. Next Button
3. Battery Compartment Cover (bottom) 10. Previous Button
4. Play/Pause Button 11. Mode Button
5. Volume Dial 12. Program Button
6. Door Open Button 13. Unit Door
7. Earphones Jack
Earphones
Power Supply
Battery Installation:
1. Open the Battery Compartment by sliding the Battery Compartment
Cover in the direction of the arrow and lifting it up.
2. Place two new “AA” size batteries (not included) into the Battery Compartment, observing
the polarity (+/-) as indicated inside the Compartment. CAUTION: Failure to properly align
the battery polarity can cause personal injury and/or property damage.
3. Replace the Battery Compartment Cover.
To Use
NOTICE: Do not use discs that have been scratched or damaged in this product.
1. Open the Unit Door by pushing the Door Button.
2. Place the CD Disc or MP3 Disc, label side up, onto the spindle until it snaps into place, and
then close the Unit Door.
3. Connect the Headphones to the Headphones Jack in the side of the unit.
4. To turn the unit on and begin playback from the first track, press the Play/Pause Button.
5. Once the CD Disc / MP3 Disc is playing, the Electronics Anti-Shock Protection will be
automatically turn on. The “ESP” will be flash & show on the LCD Display.
6. Adjust the volume by turning the Volume Dial. WARNING: Avoid prolonged exposure to
high sound levels, as this may cause permanent hearing damage.
7. Use the other controls as follows: