Champion Industries, Inc.
P. O. Box 4149, Winston-Salem, NC 27115
Tel: 336/661-1556 Fax: 336/661-1979
www.championindustries.com
Project
Item No.
Quantity
Champion Industries, Inc.
2674 N. Service Road,
Jordan Station, Ontario, Canada L0R 1S0
Tel: 905/562-4195 Fax: 905/562-4618
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC 27115 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 905/562-4195 • Fax: 905/562-4618
www.championindustries.com
(3M) 9/06 Printed in U.S.A.
CH078
84” Two Tank
High-Temperature
Rack Conveyor Dishwashing Machine
Model 84
Model
84
rack
conveyor
sPeciFier sTaTeMenT
Specified unit will be Champion Model 84 high
temperature rack conveyor dishwashing machine.
Constructed of Type 304 stainless steel and measuring
84” long with 20-3/4” vertical opening. Features top
mounted control cabinet; upper and lower one-piece
stainless steel spray arm assemblies, removable internal
scrap baskets with two-piece scrap screens. Large 26”
front access doors with double-hook safety latch. Anti-
jam conveyor drive system.
1 year parts and labor warranty.
Shown with Vent Cowl and
Damper Option
sTandard FeaTUres
• ENERGY STAR® Qualified
• Dual-pawl cradle drive system
• One-piece cast stainless steel upper & lower
spray arm assemblies
• Internal removable scrap baskets and
two-piece scrap screens
• Standard vertical opening accommodates
18” x 26” sheet pans
• Wide 26” leakproof doors, internally-fitted
• Anti-jam conveyor drive system
• Energy Sentinel (Idle pump shut-off)
• Convenient top-mounted controls
• Automatic tank fill
• Common utility connections
• Door safety switch
• Door activated drain closure
• Enclosure panels (front and sides)
• Splash shields
• Low-water tank heat protection
• Rinse-saver device
• Stainless steel heavy-gauge construction,
including base and feet
• Electric tank heat
• Wash/rinse pump 3 Hp motors
• Stainless steel pump and impeller
• Single-point electric connection
84” Two Tank
High-Temperature
Rack Conveyor Dishwashing Machine
Model 84
Model
84
rack
conveyor
oPTions & accessories
Tank heat: choice of steam coil, steam injector,
hot water coil
Blower-dryer with 60” hood, table, legs and
cradle assembly
Booster Heaters
(completely interplumbed, controls are interwired)
Steam: 40°F – 70°F rise
Electric:15 kW (40°F rise only)
(built-in 3 phase only)
Electric: 24 kW (70°F max. rise) (3 phase only)
Cantilever sideloader (with or without hood) for
90° load operation
Extended pawl bar (extended drive unit) for use with
load tabling
90° Motorized rack curve (unload)
180° Motorized rack curve (unload)
Racks: peg or flat racks (specify type)
Roller conveyor table (mobile or stationary)
Steam pressure regulating valve (unmounted)
Table limit switch, unmounted (recommended on all
rack conveyor installations)
Vent cowl, stainless steel with 7” stack and
locking damper
Extended Vent hood, stainless steel with 7” stack and
locking damper
Water pressure regulating valve (unmounted)
(standard with booster)
Vent fan control
Water hammer kit
Drain temp kit
Vertical clearance through machine: 24”
(instead of standard 20-3/4”) for large ware
Model MRC 90
90° Motorized
Rack Curve
(Must be ordered with
Roller Conveyor Table)
Model RCT 64
or RCT 84
Roller
Conveyor Table
Cantilever
Sideloader
(No hood)
Model MRC 180
180° Motorized
Rack Curve
(Must be ordered with Roller
Conveyor Table)
84” Two Tank
High-Temperature
Rack Conveyor Dishwashing Machine
Model 84
Wall-of-Water Spray Pattern
Built-in Scrap Basket
Large Heating Element
Two-Piece Scrap Screen
Stainless Steel
Built-in Nested Booster
One-Piece Cast Stainless Steel
Spray Assembly
eFFicienT neW
sPray sysTeM desiGn
To make the E-Series more efficient and
more forgiving we designed a new spray
arm system that includes:
• Wall-of-water spray pattern via stainless
steel fluted directional spray jets for
quick and efficient washing
• Easily removable spray arm assembly
for ease of cleaning
• Stainless steel pump housing
and impeller
• Larger tanks hold more water for better
washing results
inTeGraTed
boosTer heaTer
As well as the E-Series performs, we
created a way to make it perform even
better. The electric booster heater may
be optional, but it is an exceptional value
— engineered within the E-Series footprint
to offer a variety of advantages over other
booster designs, such as:
• Inter-plumbed and inter-wired
• One control shuts off washer and
booster
• 15 kW for 40°F rise
• 24 kW for 70°F rise
• Conductive heat transfer to wash tank
• Stainless steel booster heater lasts
the life of the machine
• Integrated design saves floor space
