background image

1

  

REV 73540i-20130309

ENGLISH

 

73540i

Introduction

Congratulations on your purchase of a Champion Power 
Equipment inverter generator. CPE designs and builds 
generators to strict specifications. With proper use and 
maintenance, this generator will bring years of satisfying 
service.

Portable Power Generator

This unit is a gasoline engine driven, alternating current 
(AC) generator. It is designed to supply electrical power 
for lighting, appliances, tools and similar equipment.

Record the model and serial numbers as well as date and place of purchase for future reference. Have this 
information available when ordering parts and when making technical or warranty inquiries.

Accessories

Champion Power Equipment manufactures and sells 
accessories designed to help you get the most from your 
purchase. To find out more about our covers and power 
cables, please visit our web site at:
    www.championpowerequipment.com

This Booklet

Every effort has been made to ensure the accuracy and 
completeness of the information in this manual. We reserve 
the right to change, alter and/or improve the product and 
this document at any time without prior notice. 

Champion Power Equipment Support

Model Number

Serial Number

Date of Purchase

Purchase Location

1-877-338-0999

73540i

For 

Oil Type see ‘Add Engine Oil‘ section. For Fuel Type see ‘Add Fuel‘ section.

INTRODUCTION

Summary of Contents for 73540i






























Reviews: