background image

Warranty 

Rev 73531i-20100609 E

 

 

27

 

Warranty 

CHAMPION POWER EQUIPMENT 

2 YEAR LIMITED WARRANTY 

Effective September 1, 2006. Replaces all undated 
warranties and all warranties dated before September 1, 
2006. 

Warranty Qualifications 

Champion Power Equipment (CPE) will register 
this warranty upon receipt of your Warranty 

Registration Card and a copy of your sales receipt 
from one of CPE's retail locations as proof of 

purchase. 

Please submit your warranty registration and 
your proof of purchase within ten (10) days of the 

date of purchase. 

Repair/Replacement Warranty 

CPE warrants to the original purchaser that the 

mechanical and electrical components will be free 

of defects in material and workmanship for a 
period of (2) years from the original date of 

purchase (90 days for commercial & industrial 
use). Transportation charges on product 

submitted for repair or replacement under this 
warranty are the sole responsibility of the 

purchaser. This warranty only applies to the 

original purchaser and is not transferable. 

Do not return the unit to the place of 
purchase 

Contact CPE's Technical Service and CPE will 
troubleshoot any issue via phone or e-mail.  If the 

problem is not corrected by this method, CPE 
will, at its option, authorize evaluation, repair or 

replacement of the defective part or component 
at a CPE Service Center.  CPE will provide you 

with a case number for warranty service.  Please 
keep it for future reference.  Repairs or 

replacements without prior authorization, or at 

an unauthorized repair facility, will not be 
covered by this warranty. 

Warranty Exclusions 

This warranty does not cover the following 
repairs and equipment: 

Normal Wear 

Generators need periodic parts and service to 

perform well. This warranty does not cover repair 

when normal use has exhausted the life of a part 
or the equipment as a whole. 

Installation, Use and Maintenance 

This warranty will not apply to parts and/or labor 

if this generator is deemed to have been misused, 
neglected, involved in an accident, abused, loaded 

beyond the generator’s limits, modified, installed 
improperly or connected incorrectly to any 

electrical component. Normal maintenance such 

as spark plugs, air filters, adjustments, fuel 

system cleaning and obstruction due to buildup is 
not covered by this warranty.  

Other Exclusions 

This warranty excludes: 

Cosmetic defects such as paint, decals, etc. 
Wear items such as filter elements, o-rings, etc. 

Accessory parts such as starting batteries, and 
storage covers. 

Failures to due acts of God and other force 
majeure events beyond the manufacturer’s 

control. 

Problems cause by parts that are not original 
Champion Power Equipment parts. 

This warranty does not apply to generators used 
for prime power in place of a utility. 

Limits of Implied Warranty and 
Consequential Damage 

Champion Power Equipment disclaims any 

obligation to cover any loss of time, use of this 
product, freight, or any incidental or 

consequential claim by anyone from using this 
generator. THIS WARRANTY IS IN LIEU OF 

ALL OTHER WARRANTIES, EXPRESS OR 

IMPLIED, INCLUDING WARRANTIES OF 
MERCHANTABILITY OR FITNESS FOR A 

PARTICULAR PURPOSE  
 

A unit provided as an exchange will be subject to 
the warranty of the original unit. The length of 

the warranty governing the exchanged unit will 

remain calculated by reference to the purchase 
date of the original unit. 

 
This warranty gives you certain legal rights which 

may change from state to state. Your state may 
also have other rights you may be entitled to that 

are not listed within this warranty. 

Contact Information 

Address 

Champion Power Equipment, Inc. 

Customer Service 
10006 Santa Fe Springs Rd. 

Santa Fe Springs, CA 90670 

Customer Service 

Mon – Fri 8:30 AM – 5:00 PM (PST/PDT) 
Toll Free: 1-877-338-0999 

Fax no.: 1-562-236-9429 

Technical Service 

Mon – Fri 8:30 AM – 5:00 PM (PST/PDT) 
Toll Free: 1-877-338-0999 

[email protected]

 

 

Summary of Contents for 73531i



































Reviews: