background image

ENGLISH

 

18890

Do not use this hoist for lifting or moving 
people or animals .

DANGER

Keep yourself and others a safe distance to 
the side of the cable when under tension .

DANGER

Never step over or under a cable or near a 
cable under load .

DANGER

Read this manual thoroughly before operating 
your hoist . Failure to follow instructions could 
result in damage, serious injury or death .

WARNING

Do not exceed the rated capacity .

WARNING

The wire cable may break before the motor 
stalls . For heavy loads at or near rated 
capacity, use a pulley block/snatch block to 
reduce the load on the wire cable .

WARNING

Do not use the hoist to secure an item(s) for 
transport .

WARNING

Do not use to lift loads directly overhead . 
Stand to the side while lifting .

WARNING

Hoist is meant for indoor use only, do not 
operate outside in wet conditions, rain or 
snow . Electric damage, shock or injury may 
occur if hoist is used outdoors or in wet 
environments .

WARNING

Unplug the power cord when not in use .

WARNING

Never leave an item(s) attached to the wire 
cable, lift hook, pulley hook, or loaded when 
not in use .

WARNING

Use gloves to protect hands when handling 
the lift hook, pulley hook or cable . Never let 
the cable slide through your hands .

CAUTION

Do not wrap the cable around any object and 
hook it back onto itself .

CAUTION

SAfETy RULES

Do not operate if load is not centered under 
hoist . Do not hoist at any angles .

DANGER

Do not operate if cable is worn, frayed or 
appears damaged . Replace cable before use .

DANGER

Summary of Contents for 18890





















Reviews: