Champion Industries, Inc.
P. O. Box 4149, Winston-Salem, NC 27115
Tel: 336/661/1556
Fax: 336/661-1979
www.championindustries.com
2674 N. Service Road,
Jordan Station, Ontario, Canada L0R 1S0
Tel: 905/562-4195
Fax: 905/562-4618
(1M) 10/06
Printed in U.S.A.
SPECIFICATIONS
MODEL 1527-N RACK, PAN
AND UTENSIL WASHER
Washer
Automatic washing machine designed to wash and sanitize items commonly used in
the bakery, meat, poultry, candy and food service industries. Machine is designed to
be installed in a pit or used at floor level with a ramping system.
Cabinet
55" wide x 50" deep x 93" high. Clearance height: 123". Standard door opening:
30" wide x 76-1/2" high. Wash chamber: 30" wide x 32" deep x 76-1/2" high.
Constructed of 12, 14 & 16 gauge, type 304 #3 finish, stainless steel. All seams
tig-welded, cleaned and polished.
Door
Standard right hand or optional left hand swing constructed of 14 and 16 gauge, type
304 #3, stainless steel with integral stainless steel framework. Door double skinned
for added strength. Equipped with door latch and inside release handle. Door is
interlocked with limit switch to prevent machine operation while open.
Washer Floor
Constructed of 12 gauge stainless steel formed sheets designed to provide
maximum strength. Supports constructed of 2" x 2" x 1/4" stainless steel angle.
Recirculating Wash Tank
Heated by 208/240 or 480 volt electric immersion heaters, 18 kW total,
thermostatically controlled wash temperature with low water protection system.
72 gallon capacity (64 gallons if infrared gas heated), 14 gauge stainless steel,
sloped to drain. Infrared gas and steam heating options available.
Filters
Perforated, stainless steelscreen type. Double filter system for increased
effectiveness and easy cleaning without emptying wash tank.
Fill Valve
Size 1/2" brass material, solenoid type for automatic option.
Drain Valve
Size 2" brass material, gate type for manual or electrically operated ball valve for
automatic option.
Wash Pump
15 hp, 208/240 or 480 volt, 3 phase, 60 cycle. Close coupled; 250 gallons per minute
at 35 to 45 psi, mounted on 12 gauge stainless steel formed channel base.
Rotating Wash Hub &
Water-driven stainless steel spray arm assembly with stainless steel jets, removable
Spray Arm Assembly
end caps and hand-operated, quick-release mechanism for easy cleaning and
reassembly. Mounted on stainless steel base.
Sanitizing Rinse Tank
Stainless steel, 20 gallon capacity, with 208/240 or 480 volt electric booster heaters,
18 kW total, to provide 180°/190°F hot sanitizing rinse. Uses 12 gallons per 30
second cycle. Infrared gas and steam coil heating options available, as well as
pumped rinse system.
Rinse Valve
Size 1" brass material, solenoid type, automatic.
Final Rinse Piping
Type 304 stainless steel tubing with brass compression fittings and brass or optional
stainless steel full cone rinse jets.
Control and Information
110 volt control circuit with push pad operation of “Power On,” “Stop” and “Short,
Medium or Long Wash.” A digital display indicates “Time Remaining” for each cycle.
LED’s indicate wash, rinse and unload functions. A buzzer is also included to provide
an audible indication when the machine is ready to unload. A programmable
controller allows the push pad to be used as a “Diagnostic Center” by displaying
“Error Codes” for ease of troubleshooting. Moisture resistant gauges measure Wash
Temperature, Wash Pressure and Rinse Temperature.
External Rinse Hose
Externally mounted rinse hose with spray gun for easy cleaning and maintenance
of machine.
Center
