23
100883 - 27 TON LOg SPLiTTER
OPERATiON
Work Zone
VERTICaL
OPERaTING POSITION
WARNiNg
ALWAYS use the log splitter for its intended use. The log
splitter should only be used to split wood logs, length wise
with the grain.
NEVER modify, alter or change the log splitter in anyway.
Modifications will void the warranty.
NEVER attach a rope, cable or other device to the control lever
on the log splitter.
DO NOT modify or change the engine and operating speeds or
pressure settings. These changes can cause safety issues.
ONLY operate the log splitter in daylight.
NEVER operate, or let anyone else operate, the log splitter
while under the influence of alcohol, drugs, or medication.
NEVER leave the log splitter unattended while the engine is
running.
DO NOT change the splitting position with the engine running.
Contact with the muffler can cause serious burns.
ALWAYS make sure the beam is in the locked position.
DO NOT let the beam drop as it could crush fingers or cause
damage to the log splitter.
Starting the Engine
1. Make certain the log splitter is on a flat, level surface.
2. Move the choke lever to the “CHOKE” position.
3. Move the fuel valve to the “ON” position.
4. Pull the starter cord until resistance is felt and then pull
rapidly.
