background image

OPERATOR'S MANUAL

MODEL #100683

CURvED ShAfT TRiMMER

Made in China - REV 20200622

Champion Power Equipment, Inc., Santa Fe Springs, CA USA

or visit 

championpowerequipment.com

SAvE ThESE iNSTRUCTiONS.

 This manual contains important safety precautions which should be read and understood before operating the product. Failure 

to do so could result in serious injury. This manual should remain with the product.
Specifications, descriptions and illustrations in this manual are as accurate as known at the time of publication, but are subject to change without notice.

 

WARNiNG

To reduce the risk of injury, the user must read and understand the operator’s manual before using this product. If you do not 
understand the warnings and instructions in the operator’s manual, do not use this product.

 

NOTiCE

Do not use E15 or E85 fuel (fuel containing ethanol greater than 10%) in this product. It is a violation of federal law and will 
damage the engine and void your warranty. FUEL MIXTURE for this product is powered by a 2-cycle engine and requires  
pre-mixing gasoline and 2-cycle oil in a 50:1 ratio. Pre-mix unleaded gasoline and 2-cycle engine oil in a clean container approved 
for gasoline. DO NOT mix quantities larger than usable in a 30-day period.

REGISTER YOUR PRODUCT ONLINE

at 

championpowerequipment.com

Summary of Contents for 100683

































Reviews: