![background image](http://html1.mh-extra.com/html/champion/100520/100520_operators-manual_2588811014.webp)
100520 - 8750W PORTABLE INVERTER GENERATOR
CONTROLS AND fEATURES
14
fCC Statement
1. This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
1a. This device may not cause harmful interference.
1b. This device must accept any interference received,
including interference that may cause undesired
operation.
2. Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
NOTICE
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
–
Reorient or relocate the receiving antenna.
–
Increase the separation between the equipment and
receiver.
–
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult dealer or an experienced radio/TV technician for help.
Parts Included
Accessories
Flexible Oil Funnel .....................................................................1
Dual 2.4A Port USB Adapter ......................................................1
Battery Charging Cables ............................................................1
Assembly Parts
Wheels
8 in. (20.3 cm) Never Flat Wheel (A) ..................................2
Roll Pin (B)........................................................................2
Large R-clip (C) ................................................................2
Engine Vibration Mounts
Support Leg with Vibration Mounts (D) ..............................1
Flange Bolt (M8×16) (E) ....................................................2
Folding Handle
Handle (F).........................................................................1
Flange Bolt (M6×30) (G) ...................................................4
A
D
f
G
B
E
C