3
CAUTION
Let the engine stabilize and warm up for about five minutes after starting and before using.
DO NOT OVERLOAD THE GENERATOR. Add up the rated watts (or amps) of all loads to be connected at one time.
This total should not be greater than the rated wattage/amperage capacity of the generator.
CAUTION
STARTING WATTAGE REQUIREMENTS
1. Some appli
convert voltage and amperage to wattage:
a. FORMULA: VOLTS X AMPS = WATTS
b. EXAMPLE(Voltage and amperage for 1/3 HP furnace fan):
120 Volts X 10 Amps = 1200 Running Watts
2. To deter
that was calculated by 3 times to assure adequate generator capacity. If the nameplate information is not available, use the values on the
following page as a guide.
3. Remem
atts to
start.) Most resistive loads will be listed in wattage.
4.Use the chart on the next page as a reference guide.