background image

*We are always working to improve our products. Therefore, the enclosed product may differ slightly from the image on the cover.

Have questions or need assistance?

Do not return this product to the store!

WE ARE HERE TO HELP!

Visit our website:

www.championpowerequipment.com

for more info:

•  Product Info & Updates
• Frequently Asked 

Questions

•  Tech Bulletins
•  Product Registration

– or –

Call our Customer Care Team Toll-Free at:

1-877-338-0999

FCC Statement

1.  This device complies with Part 15 of the FCC 

Rules. Operation is subject to the following 
two conditions: (1) This device may not cause 
harmful interference.(2) This device must 
accept any interference received, including 
interference that may cause undesired 
operation.

2.  Changes or modifications not expressly 

approved by the party responsible for 
compliance could void the user’s authority to 
operate the equipment.

NOTE: This equipment has been tested and found 
to comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules. 
These limits are designed to provide reasonable 
protection against harmful interference in a 
residential installation. This equipment generates 
uses and can radiate radio frequency energy and, 

if not installed and used in accordance with the 
instructions, may cause harmful interference 
to radio communications. However, there is no 
guarantee that interference will not occur in a 
particular installation. If this equipment does 
cause harmful interference to radio or television 
reception, which can be determined by turning 
the equipment off and on, the user is encouraged 
to try to correct the interference by one or more 
of the following measures:

 

Reorient or relocate the receiving antenna.

 

Increase the separation between the 
equipment and receiver.

 

Connect the equipment into an outlet on 
a circuit different from that to which the 
receiver is connected.

Consult the dealer or an experienced radio/TV 
technician for help.

FOR RESIDENTS OF CALIFORNIA: 

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects 

and other reproductive harm.

Parts Ordering:

Mon – Fri 8:30 AM – 5:00 PM (PST/PDT)

Toll Free: 1-877-338-0999

Summary of Contents for 14560






















Reviews: