Circle the model of your cooler and
record the serial number below.
Read Carefully All Of This Manual
Before Installing The Unit.
Encierre con un circulo el modelo de su
enfriador y escribe el número de serie abajo.
Lea Con Cuidado Todo Este Manual Antes
De Instalar La Unidad.
Serial #
Número De Serie
Read And Save These Instructions
Evaporative Cooling
Evaporative cooling is nature’s way of cooling. When air is moved
over a wet surface, water is evaporated and heat is absorbed. When
stepping out of a swimming pool with the wind blowing, evaporative
cooling makes you feel cool, even though the air may be warm. The
human body itself is cooled primarily by the evaporation of
perspiration.
This unit works on the same principle. Air is drawn across wet
filter pads where the air is cooled by evaporation and then circulated
throughout the building. It is this combination of cooled air and the
movement of air over the skin which makes it feel cool.
Unlike refrigeration systems which recirculate the air, an evaporative
cooler continually brings in fresh air while exhausting old air. You
are completely replacing the air every 2 to 4 minutes by opening
windows or doors or a combination of both. The air is always fresh,
not stale, laden with smoke and odors as happens with refrigerated
air conditioning.
Vea el Español en el interior
110496-1
3-05
www.championcooler.com
C H A M P I O N • M A R Q U I S
E VA P O R AT I V E C O O L E R
Models
WC 35
RWC35
WC 44
RWC46
WC 46
RWC50
WC 50
Safety Rules
1. Read these instructions carefully.
2. Electrical hook up should be done by a qualified electrician, so
that all electrical wiring will conform to your local standards.
3. Unit must be in the
Off Position
and
Unplugged
from power
receptacle when installing or performing any maintenance.
4. This cooler will run on 120 volt A.C., 60 Hz (cycle) current only.
5. Motor and pump are grounded and have an automatic thermal
overload switch which will shut motor off when it overheats.
The motor will restart automatically when it cools down.
6. Pump receptacle is for grounded evaporative cooler pump only.
Do not plug anything else into receptacle.
WARNING
:
To reduce the risk of fire or electric shock, do
not use this fan with any “solid-state fan speed control device.”
