Champion WR1
Radio Programming Guide
Champion Instruments
(678) 386-2208 | www.ChampionInstruments.com
Page
2
/
2
Step
Action
Display
4
a) If you see that the set Bandwidth is “12.5K”
then your unit is set according to the FCC
narrow bandwidth regulations.
b) If not, and you have received proper
channels from the FCC, then you can
change the Bandwidth to 12.5, click on the
Channel you need to change and put the
proper frequency into the RX and TX
fields.
c) For all Channels without a frequency
Highlight them and press the “Clear” button
d) Once all channels are properly populated
press the “Program” button.
5
a) When the Blue progress bar at the bottom
of the screen completes the programing
you will see “Set Parameters OK!”
b) Press “OK”
c) Choose “Close” at the top of the screen
d) Turn Off the WR1 and Exit the GM-xxPx
Management Software
e) The Radio is now programed, You may
reconnect to check that the channels
loaded properly
6
Should you need any help please call Champion Instruments at: (678) 386-2208
www.ChampionInstruments.com
