4
5
Alarm Clock
Setting the Alarm
1. When the Survival Skybox is off, press and hold ALARM until the
clock flashes to enter the alarm setting mode.
2. Press / to set the time. Press and hold / to decrease or
increase the time value quickly.
3. Press ALARM to confirm and exit.
Enabling/Disabling the Alarm
When the Survival Skybox is off, press ALARM to enable or disable
the alarm.
• To silence the alarm function momentarily, press ALERT/SN. The
alarm will turn on again when the snooze period (5 minutes) is
over.
• To turn off and disable the alarm, press the ALARM button.
• If you would like the alarm to activate again the next day, press
the ALARM button and the ALARM indicator will show on the
display.
Sleep function
In sleep mode, the unit will turn off automatically after a specified
time (up to 90 minutes).
1. Press and hold the button until you see “90” in the display.
Then press the button repeatedly to cycle through the
available durations for Sleep Mode (90, 80, 70, 60, 50, 40, 30, 20
or 10 minutes.) Note that the Survival Skybox will automatically
turn on when initiating SLEEP mode, and it will stay on for the
duration of the selected Sleep time.
2. To cancel the sleep function, press the button.
AM/FM/Weather Band Radios
The Survival Skybox lets you listen to local weather band, as well as
your local AM and FM radio stations.
To turn the radio on/off:
Press the button.
To change between AM, FM, or WB (weather band):
Press the BAND
button. The display shows which mode the radio is in: AM, FM, or WB
(weather band).
To increase or decrease radio volume:
Turn the Volume knob left to
decrease or right to increase the radio volume.
Using AM/FM/Weather Band radio
To tune to FM, AM or Weather Band radio frequencies:
Turn the
Tuning knob to go up or down through each radio frequency while
in FM or AM radio mode. Turn the Tuning knob to scan through
frequencies until you find a station you would like to listen or until
you hear the weather information.
Alert Function
1. Press the button to turn on the Survival Skybox.
2. Press the BAND button to select WB (weather band) (Alert
function is not available in FM/AM mode).
3. Press and hold the ALERT button. “ALE” will be shown on the
display and an ALERT icon will be flashing which indicates Alert
mode is enabled.
4. When a NOAA alert signal is received, the Survival Skybox
will switch on automatically and broadcast the Weather Band
information.
5. To turn off the Alert mode, press and hold the ALERT/SN button.
5. Turn the volume on your phone to at least 3/4 max, then start
playing something on the phone. Control the Survival Skybox
volume on the Survival Skybox itself, using the Volume knob.
NOTE: If you notice the sound from the Survival Skybox is
distorted, turn down your phone’s volume.
Reconnecting
When you turn it on, the Survival Skybox reconnects automatically
with the last paired device. When you leave the Bluetooth operating
range with the Survival Skybox turned ON, it disconnects. When
you come back into the Bluetooth operating range, your device will
be re-connected.
Streaming Audio With Bluetooth
Once you’ve paired and connected your device with the Survival
Skybox, you can control music playback from the palm of your
hand. Select your music, stop it, change songs and playlists, all right
from your device’s screen.
To adjust volume:
Turn the Survival Skybox’s Volume knob.
To disconnect from the Multi-Function Jobsite Radio:
Either turn
Bluetooth off on your device or choose “Disconnect” from the list of
options in your device’s Bluetooth settings.
To reconnect with the Survival Skybox:
Just turn the Survival
Skybox on and wait a few seconds for the Survival Skybox to find
and connect to your device. If the Survival Skybox still hasn’t found
your device (which may happen if, for instance, another device has
been connected after yours) make sure the Survival Skybox isn’t
connected to another device currently. Then select the “Weather
Radio” from the list of Bluetooth connections available in your
device’s Bluetooth menu to connect to it.