WARNING:
Read all assembly instructions completely before attempting to
assemble unit. Improper assembly could result in damage to unit or injury to use.
1.
Repeat step one for the left side. Remove nuts
and washers.
Grab Angle Brackets D and E and place them on
the ground. The pivoting point on these pieces
should be at the back of unit. Insert one (B) tubing
into support.
2.
3.
Grab second support bracket (A) install at the top
of the long tubing where next bolt is. Insert washer
and nut. Hand tighten. Repeat for other side.
Grab one support bracket (A) and thread bolts in
long tubing through the support bracket. Insert
washer and nut. Hand tighten. Repeat for other
side.
4.