CHAMP MOBILITY ChampDriver, User Manual, Page: 8 / 12

4. INSTALLATION
1. Fix the connector bar
a. Unfold the wheelchair, fix the connector bar to the wheelchair poles
b. Tighten the quickdraws
：
i. tighten the screws of the quickdraws;
ii. tighten the quickdraws
c. Tighten the screw of the connector bar
2.Fix the hinge
Fix the Hinge to the middle of the connector bar, and the shaft of the clamp
should be above the connector bar. Tighten the quickdraw1 of the clamp.
4. Assemble and disassemble the device
a. Assemble the device:
Fix the device into the clamp and tighten the quickdraw2.
b. Disassemble the device
：
Release the quickdraw2 and take off the device.
c. Connect the device and control box via wire jack.
5.
CHAMP MOBILITY