5. Perform leak check on hose to regulator,
and hose to cylinder connections with
soapy water. Bubbles indicate a leak.
Check that the connection is not cross-
threaded and that it is tight. Perform
another leak check. If there is still a leak,
remove the cylinder and contact the
manufacturer for service and repair.
6. Turn off fuel at the cylinder and
disconnect both ends of the hose when
not in use.
DISMANTLING HOSE AND
REFILLABLE CYLINDER
1. Before dismantling high pressure
hose, be sure gas pressure in hose is
eliminated.
2. Ignite stove and turn off gas valve
on cylinder.
3. Allow flame to self-extinguish.
4. When flame is out, close valves on
the appliance.
5. Remove hose.
• Use appliance only with LP (propane)
gas and the regulator/valve assembly
supplied.
• Installation must conform with local
codes, or in their absence with National
Fuel Gas Code, NFPA 54/ANSI Z223.1.
Handling and storage of LP cylinders
must conform to LP Gas Code NFPA/
ANSI 58. Appliance is not for use in or on
recreational vehicle and/or boats.
• Do not modify this appliance. Modifications
1. DO NOT leave this appliance unattended
while in use. The user must remain in the
immediate area of the product and have
a clear view of the product at all times
during operation.
2. Keep children and pets away from burner
at all times.
3. The use of alcohol, prescription or non-
prescription drugs may impair your
ability to properly assemble or safely
operate this appliance.
4. For OUTDOOR use only. Do NOT use in a
building, garage or any other enclosed
area. Do NOT use in or on recreational
vehicles or boats. NEVER use this
appliance as a heater.
5. Do not operate appliance under ANY
overhead construction. Keep a minimum
clearance of 1 foot (0.3 m) from the
sides, front and back of appliance to ANY
construction. Keep the area clear of all
combustible material and flammable
liquids, including wood, dry plants and
grass, brush, paper, and canvas. Never use
this appliance within 25 ft. (7.5 m) of any
flammable liquid.
6. Use ONLY on a level, stable surface.
7. Keep the fuel supply hose away from any
heated surfaces.
8. To prevent accidental fires, before
using the appliance ensure that the
hose is not damaged and all joints
and connections are not leaking by
turning on the cylinder valve, leave the
burner valve closed, and apply a soapy
solution to the joints and connections. If
a continuous hissing sound is heard, or if
the soapy solution bubbles, there is a leak.
Do not use the appliance if there is a leak.
Replace the faulty parts.
9. Extinguish all open flames before
connecting the gas supply to the
appliance and before checking for leaks.
10. Avoid bumping or impact with the
appliance to prevent spillage or splashing
of hot cooking liquid.
11. Do NOT move the appliance when in
use. Allow unit to cool to 115°F (45°C)
before moving or storing.
12. This appliance will be hot during and
after use. Use insulated oven mitts or
gloves for protection from hot surfaces
or splatter from cooking liquids.
13. In case there is a fire, call the local fire
department or dial 911. Stay clear from
flames. Do not attempt to extinguish an
oil or grease fire with water.
14. Use only accessories, such as cooking
vessels recommended by the
manufacturer, to allow safe and proper
performance of the product. Never use
a cooking vessel larger than the
capacity and diameter recommended
by the manufacturer.
15. This product is not intended for
commercial use.
16. Do not obstruct the flow of combustion
and ventilation air.
NOTE: This appliance is set to use 16.4 oz. disposable
propane cylinders. Use only cylinders marked
propane. Disposable propane cylinders must be
disconnected from the stove when it is in storage.
Refillable Bulk LP-Gas Tanks with a maximum capacity
of 20 pounds may also be used with an optional bulk
tank adapter hose. (Bulk tank adapter hose may not
be included) Refillable propane gas cylinders must
be turned off at the LP-Gas supply cylinder when the
stove is not in use.
The LP-gas cylinder(s) used with this stove must
be constructed and marked in accordance with
the specifications for LP-gas cylinders of the U.S.
Department of Transportation or Transport Canada,
CAN/CSA B339.
SETUP USING DISPOSABLE BOTTLE
1. Make sure burner valves are off.
2. Remove plastic cap from top of propane
cylinder. Save cap for use in storing.
Screw propane cylinder into regulator.
Be careful not to cross thread. Hand
Tighten only.
3. Check the connection between the
cylinder and the regulator with soapy
water. Bubbles indicate a leak. Check that
the connection is not cross-threaded and
that it is tight.
Perform another leak check. If there is still
a leak, remove the cylinder and contact the
manufacturer for service or repair.
4. The regulator uses a threaded fitting
to attach to the stove. It is necessary to
hold the stove to make sure the fitting
is seated. Align the regulator to the fuel
tube on the rear of the stove and push
on. Screw on the outer threaded sleeve in
a clockwise direction until tight.
5. Never operate stove with propane
cylinder in an inverted position.
DISMANTLING DISPOSABLE
PROPANE CYLINDER
1. Turn all valves to the off position and
make sure all flames are extinguished.
2. Remove the bottle from the regulator by
turning counter-clockwise.
SETUP USING HOSE AND
REFILLABLE CYLINDER
1. Make sure burner valves are off.
2. Attach hose to regulator & regulator to
stove (as shown).
3. Attach hose to cylinder.
4. Open cylinder valve.
LEAK CHECK REGULATOR & HOSE
Leak Check
1211-COJR-TriBook.indd 4-5
12/15/11 4:59 PM
