Description
Portable Bluetooth Printer
２
Instruction Handy700-BT
Power Switch
Use the Power switch located on the left side of the printer to turn the unit ON
and OFF (see Figure 1).
Indicator LEDs
There are two LEDs on the front panel that provide the following information
about the printer’s status:
• Power (Green):
The Power LED glows green when the printer is turned ON.
• Battery (Orange):
The Battery LED glows red when the battery is being
charged. This LED flashes when the battery is fully charged, and turns OFF
when the AC adapter is disconnected.
• Error (Green):
The Power LED flashes once-a-second when: 1) the printer is
out of paper, 2) when the paper cover is opened, or 3) when the printing head
temperature exceeds 140 °F (60 °C).
• Bluetooth (Blue):
Connected: Off, Disconnect or try to connect: Flashing.
Pushbuttons
There are two pushbuttons located on the front panel that perform the following
functions:
• FEED:
Momentarily press this button to advance the paper. Pressing and
holding down the button causes the paper to feed continuously. This button is
also used to start the printer’s self test (refer to Section
Self Test
).
• SEL:
Press this button to enter the printer’s set-up mode (refer to Section
Set-
Up Mode
).
Connectors
Two connectors located on the right side of the printer provide the following
functions:
• Power:
Connect the AC adapter to this connector to charge the battery pack,
or directly power the printer.
• RS-232C:
Not used in conjunction with Chamjin I&C instruments.
Summary of Contents for 0024-1236
Page 2: ......
Page 4: ......
Page 6: ...Portable Bluetooth Printer ii Instruction Handy700 BT Notes ...
Page 17: ...Portable Bluetooth Printer Instruction Handy700 BT Notes ...
