background image

© 2008, The Chamberlain Group Inc.

114A3576

All Rights Reserved

NOTICE: To comply with FCC and or Industry Canada rules (IC), adjustment or modifications of this
receiver and/or transmitter are prohibited, except for changing the code setting or replacing the battery.
THERE ARE NO OTHER USER SERVICEABLE PARTS.
Tested to Comply with FCC Standards FOR HOME OR OFFICE USE. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.

FOR TECHNICAL SUPPORT DIAL OUR TOLL FREE NUMBER:

1-800-528-9131

www.chamberlain-DIY.com

Summary of Contents for LSIA

Page 1: ...eard The Active Light will be lit while the intercom is in Monitor Mode Any other networked intercom can listen to that room If a specific channel is selected for Monitor Mode then only other intercoms on that channel or on the paging channel can listen Press the Monitor button again to exit Monitor Mode A tone will be heard indicating Monitor Mode is no longer active Voice Activation Mode VOX Voi...

Page 2: ...earn button on the new intercom until a beep is heard Within 10 seconds put any networked intercom into Learn Mode refer to table below Press and release the Talk button to verify network is complete INTERCOM LEARN MODE Press the Learn button until a beep is heard Press and hold both buttons for 5 seconds OR Each intercom will emit a tone when programmed into network Repeat for any additional inte...

Page 3: ...olarity on the round plug Need to clear intercom s memory Press and hold Learn button an initial beep will be heard Continue to hold until a second beep is heard about 15 seconds Ensure other intercoms are not activated during this time Intercoms in the network that are on will signal during the clearing process Once memory is clear the intercom can be programmed to a new network Static and feedba...

Page 4: ...ing or replacing the battery THERE ARE NO OTHER USER SERVICEABLE PARTS Tested to Comply with FCC Standards FOR HOME OR OFFICE USE Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation FOR TECHNICAL SUPPORT DIAL OUR TOLL FREE NUMBER 1 800 ...

Reviews: