Chamberlain LiftMaster CSW200UL Series, Owner'S Manual

Page: 9 / 56

7
suggEsTEd ENTRAPMENT PROTEcTION dEVIcE lOcATIONs
To prevent SERiOuS iNjuRy or DEATh from a moving gate:
• Entrapment protection devices MuST be installed to protect anyone who may come near a moving gate.
• Locate entrapment protection devices to protect in BOTh the open and close gate cycles.
• Locate entrapment protection devices to protect between moving gate and RiGiD objects, such as posts or walls.
• A swinging gate shall NOT open into public access ways.
contact sensors (Edge sensors)
install edge sensors to protect against any
entrapment or safety conditions encountered in your
gate application.
See Entrapment Protection Devices.
Edge sensor for open cycle.
Edge sensor for close cycle.
3 sided edge sensor for open
and close cycle.
Safety loops allows the gate to
stay open when vehicles are
obstructing the gate path.
Suggested for vehicles 14 feet
or longer. if a vehicle is shorter,
a center loop is recommended
and should be installed.
A center loop protects during the
Close cycle of a gate. Safety
loops are required when using a
center loop.
See Loop Wiring.