Doc 6001535, Rev G
Page 1 of 6
Wiegand Receiver with Passport Technology
Installation and Operation Instructions
SPECIFICATIONS
Power:
12VDC, 50 mA
Temperature Rating:
-40º to +185º F
RF Frequency:
390 MHZ
Accessory Transmitters
Visors:
CPT1, CPT2, CPT3, CPT4
Keychains:
CPTK1, CPTK3, CPTK1PH, CPTK3PH
TABLE OF CONTENTS
SETTING THE SWITCHES ....................................................2
INSTALLATION AND WIRING ...............................................4
TESTING AND TROUBLESHOOTING ..................................5
APPENDIX: FACILITY CODE SWITCH SETTINGS ..............6
WARNING
Children operating or playing with a garage
door/gate opener can injure themselves
and others. The door/gate could close and
cause serious injury or death. Do not allow
children to operate the door control push
button or the remote control transmitters.
Install the receiver (and all control push
buttons) out of the reach of children and
away from all moving parts of the door/gate
hardware, but where the door/gate is
visible.
OVERVIEW
The Wiegand Receiver (CPWR) is a communication
device that transmits an information packet to an access
control unit such as a Sentex Telephone Entry System.
All receiver units utilize the latest in Chamberlain® rolling
code technology.
ACCESS CONTROL COMPATIBILITY
The CPWR outputs a 26-bit or 30-bit Wiegand format
compatible with Sentex access control systems.
