16
ACCESS CONFIGURATION: CARD OR PIN, CARD + PIN, & CARD ONLY
ADD USER CARD(S)
Programming Step
Keystroke Combination
1. Enter Program Mode
✱
(Master Code) #
2. Add Card: Using Auto ID
(Allows
KPR2000 to assign Card to next
available User ID number)
OR
2. Add Card: Select Specific ID
(Allows
manager to define a specific User ID
to associate the card to)
OR
2. Add Card: Block Learn (
Allows
manager to add up to 2000 cards to
the KPR2000 in a single step †).
Takes 2 minutes to program.
1 (Read Card) #
Repeat Step 2 for additional user
cards. See Notes 1 and 2.
1 (User ID) # (Read Card) #
See Notes 1 and 2.
5 (User ID) # (The first card number)
# (Card Quantity) #
Card quantity = number of cards to be
enrolled
3. Exit Program Mode
✱
✱
† Block Learn Direct Entry
Format for programming specific Card
Numbers: Facility Code + Serial
Number (including leading 0’s)
Example: FAC- 24, SN- 100 would be
entered as:
26 Bit:
02400100
30 Bit:
0000000100
Only the Serial Number is validated for
30 bit cards.
INTRODUCTION
INSTALLATION
SET UP
WIRING