Overview
The Wireless Motion Alert uses a Passive Infra-Red
(PIR) sensor to detect movement of people and
vehicles, while allowing small animals to pass through
undetected. The base station is powered by the AC
adapter and the 4 AA batteries supply power in case
of a power outage.
NOTE:
The base station is intended for indoor use
only.
Model CWA2000
Wireless Motion Alert
1
Base Station
Passive Infra-Red (PIR)
Motion Sensor
Swivel Bushing
Mounting Plate
AC Adapter
Rubber Pads
Sun/Rain Shield
®
Batteries:
If the AC adapter is not connected, the AA
batteries in the base station should last up to one
week. If the base station batteries are low, the base
station will beep every 30 minutes. The AA batteries
in the PIR motion sensor will last up to 2 years
depending on use (lithium batteries are recommended
for colder environments). If the PIR batteries are low,
the base station will beep every 30 minutes until the
batteries are replaced. The PIR will continue to
operate with a low battery, however the light will not
illuminate. For peak performance, inspect batteries
annually and replace as needed.
Programming Additional PIR Motion Sensors:
The
Base Station can learn the code of up to 3 additional
PIR Motion Sensors, responding with unique buzzes.
To program additional PIR Motion Sensors see
Step 4.
To order additional PIR Motion Sensors call
1-800-528-9131.
Clear Memory:
Press and hold the Learn Button on
the Base Station until 3 beeps are heard.
On/Off:
To turn the base station on and off, hold
down the power button until you hear the on/off tone.
Volume:
The base station is equipped with
adjustable volume controls. The lowest volume
setting is the mute feature.
To prevent possible SERIOUS INJURY or DEATH from
electrocution, outputs are suitable ONLY for controlling low
voltage devices, 24V max, ac or dc.
Carton Inventory
Antenna
On/Off Button
Volume
Base Station
Operation & Features