7
Phone.com is the preferred SIP provider. Visit Phone.com/liftmaster to set up an account.
SIP service provider:
SIP domain:
SIP port (usually 5060):
SIP username:
SIP password:
CP# for Controller:
1
Internet Service
The controller MUST be configured with the proper network settings to operate.
NETWORK
Internet service provider:
Wi-Fi Network Name:
Wi-Fi Password:
Automatic IP addressing:
DHCP (preferred setting)
OR
Static IP Addressing:
(
NOTE:
Write down the following for future reference: IP, Netmask, Gateway, Primary, Secondary, Server Port)
(example: sip.phone.com)
(example: 12345)
(example: s98hn&@f!idjs)
PRE-INSTALL
NETWORK
PROGRAMMING
INSTALL
ACCESS CONTROL
INTRODUCTION
(located on inside of the controller door and on the display when powered up)
2
SIP Provider
3
Setup a LiftMaster Cloud Account
NOTE:
If you have an existing MyQ
®
account, your LiftMaster Cloud account will have the same
password.
1. If you do not have a LiftMaster Cloud Account, call LiftMaster Customer Care at 800.323.2276 to
activate a LiftMaster Hosted Cloud Service account.
2. You will get a welcome email from LiftMaster. Accept the invitation and register your account.
3. You will get a second email to activate your account.
4. Login to your account.
5. Set up your site and add residents and credentials (refer to the available Help in LiftMaster Cloud).
6. Continue with the installation of the controller in this manual.