background image

1

Model 940D-01 Security

®

Wireless Keyless Entry

/

To prevent possible SERIOUS INJURY or DEATH from a moving
gate or garage door:
• Install Keyless Entry Control within sight of the garage door, out of

reach of children at a minimum height of 5 feet (1.5 m), and away
from all moving parts of door.

• ALWAYS keep remote controls out of reach of children. NEVER

permit children to operate, or play with remote control 
transmitters.

• Activate gate or door ONLY when it can be seen clearly, is properly

adjusted, and there are no obstructions to door travel.

• ALWAYS keep gate or garage door in sight until completely closed.

NEVER permit anyone to cross path of moving gate or door.

WARNING

CAUTION

WARNING

WARNING

1. Press and release the “learn” button on motor

unit. The learn indicator light will glow 
steadily for 30 seconds.

2. Within 30 seconds, enter a four digit personal

identification number (PIN) of your choice on
the keypad. Then press and hold the ENTER
button.

3. Release the button when the motor unit lights

blink. It has learned the code. If light bulbs
are not installed, two clicks will be heard.

SETTING THE PERSONAL ENTRY PASSWORD

We recommend that you install the battery and program
the Keyless Entry now, prior to installation. Then you can
test the reception at the mounting location before you
proceed further.

USING THE “LEARN” BUTTON

Side two contains instructions for installing the Keyless
Entry, changing the personal entry password and setting a
temporary password.

NOTICE: To comply with FCC and or Industry Canada rules (IC), adjustment or modifications of
this receiver and/or transmitter are prohibited, except for changing the code setting or replacing
the battery. THERE ARE NO OTHER USER SERVICEABLE PARTS.
Tested to Comply with FCC Standards FOR HOME OR OFFICE USE. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.

FEATURES 

For use with any 315 MHz SECURITY

®

garage door openers

having a purple “learn” button.

Personalized Password:

Up to 10,000 possible combinations.

Password can be easily changed if desired.

Temporary Password:

Can be added for visitors or service

persons. This temporary password can be limited to a
programmable number of hours or a programmable number of
entries.

Rolling Code:

While your password remains constant until you

change it, the code between the Keyless Entry and the receiver
changes with each use, randomly accessing over 100 billion
new codes.

Operation:

Opener activates when 4-digit password and

ENTER button is pressed.

If wrong numbers are accidentally pressed, correction can be
made immediately. The ENTER button will transmit only the last
four digits.

The keypad will blink for 15 seconds after the password is
transmitted. During that time the ENTER button can be used to
stop or reverse the door travel.

The Lock feature on openers with Multi-Function Door Controls
is designed to prevent operation of the door from portable
transmitters. However, the door will open and close from the
door control push button and the Keyless Entry.

One Button Close:

Opener can be closed by pressing only the

ENTER button if the one button close feature has been
activated. This feature has been activated at the factory. To
activate or deactivate this feature press and hold buttons 1 and
9 for 10 seconds. The keypad will blink twice when the one
button close is active. The keypad will blink four times when one
button close is deactivated.

1. Enter a four digit personal identification 

number (PIN) of your choice on the keypad.
Then press and hold ENTER.

2. While holding the ENTER button, press and

hold the LIGHT button on the Multi-Function
Door Control.

3. Continue holding the ENTER and LIGHT

buttons while you press the push bar on the
Multi-Function Door Control (all three buttons
are held).

4. Release buttons when the motor unit lights

blink. It has learned the code. If light bulbs
are not installed, two clicks will be heard.

LOCK

LIGHT

USING THE MULTI-FUNCTION DOOR CONTROL

LOCK

LIGHT

LOCK

LIGHT

Summary of Contents for 940D-01

Page 1: ...hat may cause undesired operation FEATURES For use with any 315 MHz SECURITY garage door openers having a purple learn button Personalized Password Up to 10 000 possible combinations Password can be easily changed if desired Temporary Password Can be added for visitors or service persons This temporary password can be limited to a programmable number of hours or a programmable number of entries Ro...

Page 2: ...O SET A TEMPORARY PIN You may authorize access by visitors or service people with a temporary 4 digit PIN After a programmed number of hours or number of openings this temporary PIN expires and will no longer open the door It can be used to close the door even after it has expired To set a temporary PIN 1 Press the four buttons for your personal entry PIN not the last temporary PIN then press and ...

Page 3: ...moviemento PR A ADVERTENCIA ADVERTENCIA CARACTERÍSTICAS Para usarase con abridor de puertas de cochera Security de 315 MHz y receptores universal que tengan un botón Aprender Learn morado Contraseña Personalizada Hasta 10 000 combinaciones posibles La contraseña puede cambiarse fácilmente si así se desea Contraseña Provisoria característica no es disponible con receptor universal Puede agregarse p...

Page 4: ...aya aprendido Pruebe oprimiendo el nuevo PIN luego oprima ENTER La puerta debe moverse PARA PONER UN PIN TEMPORAL Usted puede autorizar el acceso a sus visitas o a personal de servicio con un PIN temporal de cuatro dígitos Después de un determinado número de horas programadas o número de aberturas este PIN temporal expira y no vuelve a abrir la puerta Se puede usar para cerrar la puerta aún despué...

Reviews: