background image

1

To prevent possible SERIOUS INJURY or DEATH from electrocution or 
fire:

•   Turn off power at the fuse box or circuit breaker BEFORE 

proceeding. 

•  The light control is ONLY for indoor use.

•   Installation and wiring MUST be in compliance with ALL local 

electrical and building codes.

MODEL 823LM

REMOTE LIGHT SWITCH

The Remote Light Switch offers a 
convenient way to control the lights in 
your home. The Remote Light Switch 
is compatible with Security

 

2.0™ and 

MyQ™ products. The Remote Light 
Switch is compatible with up to 
8 Security

 

2.0™ remote controls and 

a combination of up to 8 MyQ™ 
enabled garage door openers or 
LiftMaster

®

 Internet Gateway devices. 

This product is NOT recommended for 
control of household appliances or 
fans. Not for use with 3-way or 4-way 
switch combinations.

SPECIFICATIONS

Bulb Type:

  . . . . . . . . . . . . . . Compact fluorescent, incandescent, or LED

Max Load Rating:

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300 Watts

Incandescent

 

Lamp

  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300 Watts

Compact Fluorescent Lamp (CFL)

. . . . . . . . . . . . . . . . . . . . . .  2.5 Amps

Voltage

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120 Vac

NOTE:

 The wall plate is 

not provided.

OVERVIEW

MODES OF OPERATION

REMOTE CONTROL OPERATION: 

Allows you to activate the 
remote light switch from a 
remote control.

NOTE:

 If your remote 

control is already 
programmed to your garage door opener, 
choose a different remote control button to 
program to the remote light switch.

The remote light switch can be programmed to Security

 

2.0™ remote controls, MyQ™ garage door openers, or LiftMaster

®

 Internet Gateway devices.

GARAGE DOOR OPENER OPERATION:

 

Allows you to synchronize 
the remote light switch with 
your garage door opener 
light bulbs. The 
synchronization with the 
garage door opener lights is disabled if you 
manually turn the light switch on. The light
switch must be OFF to synchronize the garage 
door opener with the light switch. 

Example:

 The garage door opener light bulbs 

are set to automatically turn off after 4 ½ 
minutes, the remote light switch will also turn 
off after 4 ½ minutes. 

INTERNET GATEWAY OPERATION: 

Allows you to activate the 
remote light switch from a 
web browser (requires the 
internet gateway accessory 
model 828LM).

Switch

LED

NOTICE: To comply with FCC and/or Industry Canada (IC) rules, adjustment or modifi cations of this 
transceiver are prohibited. THERE ARE NO USER SERVICEABLE PARTS.

This device complies with Part 15 of the FCC rules and IC RSS-210. Operation is subject to the following 
two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any 
interference received, including interference that may cause undesired operation.

AVIS : Les règles de la FCC et/ou d’Industrie Canada (IC) interdisent tout ajustement ou toute modifi cation de 
ce récepteur. IL N’EXISTE AUCUNE PIÈCE SUSCEPTIBLE D’ÊTRE ENTRETENUE PAR L’UTILISATEUR.

Cet appareil est conforme aux dispositions de la partie 15 du règlement de la FCC et de la norme IC RSS-210. 
Son utilisation est assujettie aux deux conditions suivantes : (1) ce dispositif ne peut causer des interférences 
nuisibles, et (2) ce dispositif doit accepter toute interférence reçue, y compris une interférence pouvant 
causer un fonctionnement non souhaité.

Learn Button

Cover

CARTON INVENTORY

Screws (2)

Remote Light Switch

Wire Nuts

(2)

(1)

Summary of Contents for 823LM









Reviews: