Challenger Techstar CVT MT525B Series, Operators Instruction Book

Page: 160 / 248

7 . ACCESSORIES AND OPTIONS
7.22 Challenger MT500B EU
7.7 - "DATATRONIC 3" ONBOARD COMPUTER
7.7.1 - General
The onboard computer is a measuring and setting instru-
ment providing information that helps to make optimum
use of the tractor. It is located on the cab right-hand con-
sole (Fig. 1).
The Datatronic 3 is switched on automatically when the ig-
nition gets on. The multi-colour diode (F Fig. 1) comes on in
green. When the ignition is switched off, the Datatronic
stores all the data. While the ignition gets off, the multi-col-
our diode (F Fig. 1) comes on in red while the parameters
are being stored.
7.7.2 - Description
A. Main data display:
1. WORK application,
2. SETTINGS application,
3. HEADLAND application,
4. EHS VALVES application,
5. MEMORIES application,
6. DUAL CONTROL application (optional).
B. Data display for other functions:
7. EHS valve locking (unlocking via the button on the
console near the PTO control),
8. Linkage status (unlocking via Lifting / Neutral action).
9. Kick out mode (spool valve activation time). The
key
«
6
authorises this mode.
C. Access keys to the various applications:
«
1
WORK application
«
2
SETTINGS application
«
3
HEADLAND application
«
4
EHS VALVES application
«
5
MEMORIES application
«
6
used to authorise spool valve activation time
ESC returns to the previous menu.
D. Encoder:
- used to navigate and alter values in menus,
- used to validate actions selected by the encoder.
E. Brightness sensor.
F. Multi-colour diode.
G. Memory card reader (MMC and SD-Card format).
1
2
3
4
5
6
ESC
Z3A-781-08-04
B
C
Fig. 1
WORK
HEADLAND
SETTINGS
DUAL CTRL
MEMORIES
EHS VALVES
A
1
2
3
8 7 9
G
5
4
6
D
F
S