Enable phone network function, install and
run “LSCAM” software.
Click “Click here to add camera”.
Run“Scan QR code”.
Scan QR code (supplied with each unit)
Different options are listed.
Using mobile phone APP
Scan QR code
2
Scan QR code (This is the easiest method
to setup)
When this product (IP Camera) is used for the
first time, it needs to be connected wirelessly
to a router with internet access via one of the
three methods below.
Configuration of IP Camera
Press the WPS button in the panel of IPCAM for
at least 5 seconds. The blue indicator will flicker
rapidly after entering into the WPS mode. Then
press the WPS button in the router which connects
to IPCAM (the operation of router entering into WPS
mode should refer to the manual of router).
The camera is now setup to the router.
WPS setup
a.
Scan QR code
