Any item brought into the cab must not extend into defined operator space. Secure loose items. Objects
must not pose an impact hazard in rough terrain or if there is a rollover.
1.1.19 Cut and crush prevention
Support the equipment correctly when performing work below the equipment. Do not rely on the hydraulic
cylinders to hold up the equipment. An implement can fall if a control lever is moved or if a hydraulic line
breaks.
Never start the machine engine by shorting across the starter solenoid terminals. Machine movement can
occur causing runovers .
Never make adjustments while the machine is moving or while the engine is operating.
Whenever there are attachment control linkages, the clearance in the linkage area will change with
movement of the attachment.
Stay clear of all rotating parts and all moving parts.
Keep objects away from moving fan blades. The fan blades will throw objects and the fan blades can cut.
Do not use a wire tow cable that is kinked or frayed. Wear gloves when touching wire cable.
When hitting a retainer pin, the retainer pin can fly out causing personal injury. Make sure that there are no
people in the area when hitting a retainer pin. To prevent eye injury, wear protective glasses when hitting a
retainer pin.
Chips or other debris can fly off objects when hitting the objects. Make sure that others are clear of the
area before hitting any object.
1.1.20 Rollover protective structure
Do not make any modifications to the rollover
protective structure (ROPS) as this will change
protection provided. Do not change structure by
welding, cutting, adding weight, or drilling holes
into structure.
Any change not specifically authorized by AGCO
invalidates AGCO certification for ROPS. The
protection offered by ROPS will be impaired if
ROPS has structural damage or alteration. Damage
to structure can be caused by a turn over or by
falling objects.
Do not mount items (fire extinguishers, first aid
kits, work lights, etc.) by welding brackets or
drilling holes in ROPS. See dealer for mounting
guide lines.
TRHJA0110319901
Original art: ~/Desktop/Graphics/ST4/ACW3549100-1-ECN220604-.pdf
GUID-7998C354-06FC-455A-8D67-77F8F85E1A45-low.svg [Low]
Fig. 7
GUID-C5B3B243-B184-48C6-9CF2-F4FF44F55F30 [V4]
GUID-E9465583-03E5-41F2-90E8-26F033848D5D [V4]
1. General
1-10
Rubber Track Tractor
79036614D
