J2840 Pet Carrier Trailer
Assembly Instructions
No tools needed!
Adjustable wrench optional, but not required.
Parts Included:
(2) – Inflatable Tires/Wheel Assembly 57-305 (16x2.125)
(1) – Frame Assembly Pieces w/ Attached Enclosure
(1) – Safety Flag
(1) – Hitch Attachment
(1) – Ball Hitch Adapter
1. Remove all parts from box, unwrap and check inventory per the above list.
2. Pet trailer comes in a folded condition. Unfold the two sides, reach inside and raise the crossbar
into the locking slot. Insert the locking pin. Trailer is now fully unfolded.
3. Flip the trailer onto one side. Remove the rubber cap from the wheel axle. The rubber cap can
be discarded or saved if you plan on disassembling the trailer at a later time.
1
of
5
