Model DX77
Installation, Operation and Maintenance
Page
5
Rev 06/17/2020
DX77-IOM-A.doc
C
ONTROL
C
ONSOLE
L
AYOUT
7) Place Control Console as shown in
Fig. 2
for
surface mount or flush mount applications.
Operator should be in a position to notice any
misalignment of lifting pads or vehicle during
operation. Challenger Lifts does not recommend
placing the console in a different location or
orientation and doing so would be the
responsibility of the installer and/or end user.
IMPORTANT: Control console should always
be orientated so operator is facing the
direction of the lift when operating the lift.
8) If lift will be a flush mount application, the total
run length of the pipe chase from pit to bottom
rear of the control console should not exceed 72”.
The standard hose will only allow 72”.
Fig. 2 – Control Console Placement