3
•
Unscrew the 3 screws from the template (Picture 1).
•
Fix the two parts of the base together (Picture 2). Pass the power cord through the
center hole of the base.
•
Align the base and template, and fix the 3 screws using a screwdriver (Picture 3).
•
Insert the wire until it reaches the opening at the bottom of the base (Picture 4).
4.OPERATION.
Set the appliance on a dry, level and sturdy surface.
Plug the appliance into the mains.
Note
: All controls can be operated from the fan unit or from the remote control.
