Challenge Spartan 150, Operator'S Manual

Page: 12 / 23

6.0 Operation
12
6.3 Jogging Aid
Always remove the jogging aid from the table before making a cut.
A jogging aid is included as standard equipment with the Spartan 150. This tool allows the operator
to load and align paper without the need to place hands or arms under the knife or clamp.
To use, load the paper against the side and backgauge using the jogging aid (Figure 7 & Figure 8).
Remove the jogging aid from the table, close the shield, clamp the paper, and make the cut.
Figure 7
Figure 8
6.4 Line Light
The Spartan 150 comes standard with an LED line light. The line light comes on and stays on
whenever the power is on. To use, simply align paper under clamp, and use the red light line as an
indicator of where the cut will be made (Figure 9).