9
Customer Helpline
01904 727508
www.coreservice.co.uk
Assembly
Preparing to assemble the grass trimmer
Assemble the safety guard
Assemble the front handle
WARNING!
- Always ware protection gloves. Unplug the power cord from power source.
- Always take care when removing the packaging to prevent damage to you or to the grass
trimmer.
- Keep the carton in guarantee time. Always recycle the packaging in accordance with local
recycling schemes.
1.
Insert the flower guard into the slot on the motor housing.
2. Insert the safety guard into the slot on the motor housing.
3. Screw tight the guard.
Warning!
The guard must be properly installed. The guard provides partial protection from the risk
of thrown objects to the operator and others.
NOTE: If guard is not properly installed, damage to unit(including motor failure) will result.
1. Turn the handle knob and draw out the bolt from the front handle.
2. Insert the front handle in the machine handle.
3.
Adjust the front handle to a proper position.
4. Insert the bolt and handle knob, then turn the handle knob lightly tighten.
