11
Customer Helpline
01904 727508
www.coreservice.co.uk
Assembly
Preparing to assemble the grass trimmer
Charging the battery
Charging procedure
NOTE:
Before using the tool, read the instruction book carefully.
WARNING!
The charger and battery pack are specifically designed to work together so do not attempt to
use any other devices. Never insert or allow metallic objects into your charger or battery pack
connections because an electrical failure and hazard will occur.
The battery needs to be charged before first use and whenever it fails to produce sufficient power
on jobs that were easily done before.
WARNING!
NEVER LEAVE THE BATTERY AND CHARGER UNATTENDED WHEN
CHARGING THE BATTERY.
This product comes with a lithium ion battery pack. Lithium Ion batteries don’t lose charge when
not in use, and don’t lose charging capacity overtime. Never the less it is best practice to charge
the battery when empty or insufficient to do the job.
Attention!
The battery cannot be charged immediately after use, it should cool off for a period of
time. The LED (9) lights switching from green to red means it can be charged.
1.
Connect the charger (7) to the charging station
（
8
）
.
2.
Plug the charger into an appropriate AC power outlet. The LED (9) lights green to tell you that
the charger is ready for use.
3.
Slide the charging station (8) into the battery pack (6), make sure the charging station is fully
seated in the battery pack. The LED (9) lights up red to tell you that the battery pack is on
charge.
4.
The battery pack will be fully charged in 3~5 hours. And the LED (9) lights up green again to
tell you that the battery pack is fully charged.
7
9
8
6
