background image

 

 

6.0  Operation 

 
 

 

11

 

6.2 Jogging (all models) 

Be aware that the nature of jogging paper is loud

.  Select a jogging speed.  Place a paper pile into the 

jogging tray.  Depress the foot switch.  Gently tamp the edges of the pile until the pile is adequately 
jogged.  Release the foot switch and continue tamping until the motor stops.  Remove the pile. 
 

6.3 Air Jogging 

The following section describes the operation of air assist model of the iJOG. 
 

6.3.1 Three Modes of Jogging 

The air assist feature can be set to three different modes:  air on all the time the foot switch is 
depressed, air on for an adjustable period of the time the foot switch is being depressed, and air off.  
The Blower control switch is located at the right rear corner of the machine.  Set it as follows: 
 

Mode Switch 

Position 

Timer Mode 

Up 

Always On 

Center 

Off Down 

 

6.3.2 Air Flow Adjustment 

The amount of airflow can be set from zero to maximum.  The air flow adjustment knob is located 
next to the Blower switch.  Turning the knob counter-clockwise decreases the air flow.  Turning it 
clockwise increases air flow. 
 
A medium to low setting is recommended for most applications. 
 

6.3.3 Timer Adjustment 

The amount of time the blower runs while the foot switch is depressed can be adjusted to a maximum 
of approximately 10-12 seconds.  Turning the knob counter-clockwise decreases the time while 
turning it clockwise increases the time. 
 
A medium to low setting is recommended for most applications. 
 

6.4 Operating Tips 

 

Ear protection is recommended if operating for extended periods of time. 

 

If the machine is placed on a bench, a lip should be added to the edge of the bench to 
prevent the machine from sliding off. 

 

The rubber feet should be kept clean to prevent the machine from sliding. 

 

Medium to low settings are recommended for most applications and will extend the life of the 
machine. 

 

Summary of Contents for iJOG












































Reviews: